Materials exceed most industry         requirements. 

     ASTM, NSF, IAPMO, ICC APPROVED  

Flow-Liner CIPP

Contact us for FREE Shipping Specials!

LINER

 

We stock 2", 3", 4", 5", 6", 8" felt and woven liner in 2mm, 3mm, 4.5mm, 6mm thicknesses. Larger sizes available. All liners made in the USA and Europe by the largest and highest quality manufactures. Any length available!

3", 4", 5", 6", 8" and up
available in other thicknesses
2mm flexible liner 2", 3", 4"
4.5mm 3", 4", 5", 6"
3", 4", 5", 6" Great for 90's and some transitions
Transitions and for 90's. Transitions a full two sizes
4" to 6"
4", 6" liner designed for cast iron. Straight and 45's
5" flexible woven liner for transitions and 90's
Scrim w/3' section of 4"-6" transition 12/3/60 15/3/85 50/3/50 100/3/100 70/3/30
Show More
CALIBRATION TUBE

 

 

We stock calibration tube (bladder) for ambient curing and high temp curing. Green, Orange and clear are all strong and flexible. We import these from Europe as we have found these to be by far the preferred cal tube requested by installers.



Ambient Cure
Ambient Cure Calibration Tube. Green, 120F max
2", 3", 4", 5", 6" 328' rolls
High Temp Orange
High Temp Calibration Tube. Orange, 185F max
4", 5", 6", 8", 10" 328' rolls
High Temp Clear
High Temp Calibration Tube. Clear, 185F max
4" & 6" 328' rolls
Pre-Liner
Pre-Liner 4" & 6"
328' rolls
Show More
PREMIUM EPOXY RESIN

 

 

We stock premium quality epoxy resins made in the USA. 4:1 mixtures for a wide variety of working times and cure times. No need to pre-mix our Part A as we don't add talc fillers! Vinyl Ester Resin and Polyester Resin available as well.

Epoxy Base Resin
Quik-Pox Base Resin
"Part A" 40 lbs. pail. Drum & tote available
QU 60 Hardener
Quik-Pox 60. "Part B"
60 min. working time@77F
60 min. cure @125F 20#'s
QU 30
Quik-Pox 30. "Part B"
30 min. working time@77F
45 min. cure @125F 20#'s
QU 15
Quik-Pox 15. "Part B"
15 min. working time@77F
30 min. cure @125F 20#'s
Show More
MISCELLANEOUS

 

 

We stock pull strap, vacuum pumps, nozzles/inversion heads for tank and gun systems, delivery hoses with camlock ends, scales, mixing bits, layflat hose, pre-liner, poly tubing for pull-in-place, fiberglass for point repairs, Rhino glue

SLIC Lubricant
1 gallon
3P Resin
1 inch Pullstrap
300' roll
2 inch Pullstrap
300' roll
Lay Flat Hose
Recirculation hose
50', 75', 100'
Digital Scale w/case
Standard Vacuum
Standard Vacuum for wet-out
RUBBER BLADDER
Rubber bladder for pull in place
Mixing Bit
Stainless Steel mixing bit
Temperature Gun
Infrared Temp Gun
Hose Clamps
packer
Full line of reasonably priced packers for point repair
Inversion Heads
Inversion heads.
3", 4", 6" Straight, 45's & 90's
Delivery Hose
Delivery hoses for tank units and gun units with adapter.
DomeHead Manifold
Manifold fits directly to Quik-Shot nozzle. Includes both water and air connections.
Air Manifold
Ambient cure manifold
Water Manifold
Hot water recirculation manifold
Funnel
Wet-out funnel
Silicate Resin
Silicate resin kits
Patch resin kits
Mix and shake
patch%20kits_edited
controller flex adapter
Packers and Materials
Fiberglass Matting
Chain Knocker
Sandpaper Grinder
Replacement sandpaper
Lateral cutter
Centering tool
Reinstatement Cutter
Reinstatement Cutter
Show More
High Temp Clear

High Temp Calibration Tube. Clear, 185F max 4" & 6" 328' rolls